655 Bronze Round Rod, Unpolished (Mill) Finish, H02 Temper, ASTM B98, 0.75" Diameter, 36" Length
The 655 bronze round rod with H02 temper is unpolished, meets American Society for Testing and Materials International ASTM B98 specifications, and has a standard tolerance. The 655 bronze alloy has high strength and corrosion resistance with better formability than 642 bronze due to its higher silicon content. The material has an H02 temper, meaning it has been cold worked to a 1/2 hard temper.
Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Copper, a term that applies to alloys containing at least 99.3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. It provides greater strength and better machinability than copper or bronze. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness.
Tensile strength, used to indicate the material's overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.
- 655 bronze has high strength and corrosion resistance with better formability than 642 bronze
- Meets ASTM B98 specifications
- Unpolished (mill) surface has no finish
- H02 temper has been cold worked to a 1/2 hard temper
- Standard tolerance
Label: Small Parts
Manufacturer: Small Parts
Part Number: R655007500CDHH-36
Publisher: Small Parts
Studio: Small Parts