Compare: Amazon Craigslist eBay Google Shopping
eCLUTCHMASTER eCLUTCHMASTER STAGE 3 CLUTCH KIT SET fits GOLF GTI JETTA PASSAT CORRADO VR6
Returns Accepted 14808 Reviews from Buyers Seller ratingRatings Safe and secure paymentsSafe and secure payments. 100% Satisfaction Guaranteed

eCLUTCHMASTER STAGE 3 CLUTCH KIT SET fits GOLF GTI JETTA PASSAT CORRADO VR6

115.43
$119.0 (3% off)
About this Item
Available stock:87
Compatibility:See compatible vehicles
Guarantee: Paypal Buyer Protection
Location: Anaheim, California
Returns: Accepted
Condition: New
Share:
About the Seller
ShippingHandling time and Shipping policy

Compatibility
CLUTCH PRESSURE PLATE : [PHASE 3 HEAT TREATED SINGLE PUSH TYPE]
CLUTCH SPECIFICS : [228MM 28 SPLINE]
Country/Region of Manufacture : [United States]
Warranty : [Yes]
Surface Finish : [6 puck Sprung MIBA cooper ceramics]
Placement on Vehicle : [Left]
Other Part Number : [K70038-02, 801702, K70038-03,3000 384 00, 52285606]
Interchange Part Number : [VW-111, 021-198-141,021-198-141-A, 58 16 210 64613]
Manufacturer Part Number : [EC-02015HP3-CHTE]
Brand : [eCLUTCHMASTER]
© 2016 PixalSoft. All Rights Reserved
About This Item
Item Specification
eCLUTCHMASTER STAGE 3 CLUTCH KIT SET fits GOLF GTI JETTA PASSAT CORRADO VR6 This is a stock photos eCLUTCHMASTER Stage 3 Copper Ceramic Racing Clutch Kit is a brand new Stage 3 heavy duty racing pressure plate with Stage 3, 6 Puck Sprung Copper Ceramic Racing Disc setup can hold and 70% more pressure increase over stock. eClutchmaster Stage 3 6 Puck Miba Ceramic Racing Disc. A Miba buttons are ULTRA QUALITY Material For Friction Material In The Clutch Market. If you want the best the industry has to offer, ask for eClutchmaster 6 Puck Sprung Copper Ceramic Racing Disc. The eClutchmaster Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the eClutchmaster Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result!. **The throwout bearing and pilot bearing (if required) included ($80 value) for free! Features of eClutchmaster Stage 3 Copper-Ceramic Racing Clutch System 1. Heavy Duty Stage 3 Heavy duty racing pressure plate 2. Hi-Leverage Design 3. Precision heat treated single diaphragm 4. Re-Arched Diaphragm for Superior Engagement 5. High clamping force 6. NO unnecessary increase in pedal pressure 7. 6-Wings Ceramic Button Disc 8. More Grip Power, longer lasting (Individual components available upon request) COMPONENTS: eCLUTCHMASTER Heavy Duty Stage 3 Pressure Plate eCLUTCHMASTER Stage 3 Racing 6puck Sprung Disc Release Throwout Bearing Alignment Tool APPLICATION: 1992 - 1994 Volkswagen Corrado SLC (2.8L 12 valve SOHC VR6) 1995 - 1995 Volkswagen Corrado Base Coupe (2.8L V6 2 Door) 1993 - 2002 Volkswagen Golf (2.8L 12 valve VR6; including GTI) 1993 - 2002 Volkswagen Jetta (2.8L 12 valve VR6; including GLI) 1992 - 1997 Volkswagen Passat (2.8L 12 valve VR6) ITEM SPECIFICATIONS: Brand : eCLUTCHMASTER Manufacture Part Number : EC-02015HP3-CHTE OTHER PART REFERENCE PART# K70038-02, 801702, K70038-03,3000 384 00, 52285606,K70038-02, 801702, K70038-03,3000 384 00, 52285606 Surface Finish : CAST IRON, CERAMIC Torque :  283 Lb/Ft Horse Power :  287 Hp Warranty : YES Country of Manufacture : USA**FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARIES** eCLUTCHMASTER eCLUTCHMASTER STAGE 3 CLUTCH KIT SET fits GOLF GTI JETTA PASSAT CORRADO VR6 eCLUTCHMASTER STAGE 3 CLUTCH KIT SET fits GOLF GTI JETTA PASSAT CORRADO VR6 This is a stock photos eCLUTCHMASTER Stage 3 Copper Ceramic Racing Clutch Kit is a brand new Stage 3 heavy duty racing pressure plate with Stage 3, 6 Puck Sprung Copper Ceramic Racing Disc setup can hold and 70% more pressure increase over stock. eClutchmaster Stage 3 6 Puck Miba Ceramic Racing Disc. A Miba buttons are ULTRA QUALITY Material For Friction Material In The Clutch Market. If you want the best the industry has to offer, ask for eClutchmaster 6 Puck Sprung Copper Ceramic Racing Disc. The eClutchmaster Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the eClutchmaster Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result!. **The throwout bearing and pilot bearing (if required) included ($80 value) for free! Features of eClutchmaster Stage 3 Copper-Ceramic Racing Clutch System 1. Heavy Duty Stage 3 Heavy duty racing pressure plate 2. Hi-Leverage Design 3. Precision heat treated single diaphragm 4. Re-Arched Diaphragm for Superior Engagement 5. High clamping force 6. NO unnecessary increase in pedal pressure 7. 6-Wings Ceramic Button Disc 8. More Grip Power, longer lasting (Individual components available upon request) COMPONENTS: eCLUTCHMASTER Heavy Duty Stage 3 Pressure Plate eCLUTCHMASTER Stage 3 Racing 6puck Sprung Disc Release Throwout Bearing Alignment Tool APPLICATION: 1992 - 1994 Volkswagen Corrado SLC (2.8L 12 valve SOHC VR6) 1995 - 1995 Volkswagen Corrado Base Coupe (2.8L V6 2 Door) 1993 - 2002 Volkswagen Golf (2.8L 12 valve VR6; including GTI) 1993 - 2002 Volkswagen Jetta (2.8L 12 valve VR6; including GLI) 1992 - 1997 Volkswagen Passat (2.8L 12 valve VR6) ITEM SPECIFICATIONS: Brand : eCLUTCHMASTER Manufacture Part Number : EC-02015HP3-CHTE OTHER PART REFERENCE PART# K70038-02, 801702, K70038-03,3000 384 00, 52285606,K70038-02, 801702, K70038-03,3000 384 00, 52285606 Surface Finish : CAST IRON, CERAMIC Torque :  283 Lb/Ft Horse Power :  287 Hp Warranty : YES Country of Manufacture : USA**FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARIES** Free shipping within lower 48 States via USPS Standard, For Expedite Shipping please refer to Payment options. Email us for AK, HI, PR and International Shipping Rate(USPS Priority Air Parcel) PAYPAL CONFIRMED ADDRESS ONLY. WE DO NOT SHIP OTHER THAN A PAYPAL CONFIRMED ADDRESS    FREE SHIPPING WITHIN 48 CONTINENTAL STATES (3-6 BUSINESS DAYS) VIA USPS STANDARD PARCEL. 3 PRIORITY SHIPPING, YOU CAN SELECT USPS PRIORITY AS SHIPPING OPTION, JUST ADD $15.00. FOR INTERNATIONALS SHIPPING $79.00 AND $149.00 FOR CLUTCH AND FLYWHEEL COMBO SET VIA USPS PRIORITY AIR MAIL. For Express For Urgent  please send message thru eBay messaging system for quotation.  - RMA # : Call us at 562-691-5420 (9am - 5pm PST(Mon-Fri)) - Return Shipping : Buyer is responsible for return shipping cost - Exchange : Up to 30days from of purchase.(Brand new condition, no restocking fee) - Return : All returns will be subject to 20% restocking fee.  Return your purchase for up to 30 days from date of purchase for a refund, Must be in brand new, resalable condition. - Damaged Item : Contact us at 562-691-5420 - Manufacturer Warranty : 3 months or 3000 miles(whichever comes first) from the date of purchase - We do not allow any return without RMA# Any Questions? Please check this listing page carefully as the answer is usually there. If not, let us know and we'll try our hardest to reply within one working day.- RMA # : Call us at 562-691-5420 (9am - 5pm PST(Mon-Fri)) - Return Shipping : Buyer is responsible for return shipping cost - Exchange : Up to 30days from of purchase.(Brand new condition, no restocking fee) - Return : All returns will be subject to 20% restocking fee.  Return your purchase for up to 30 days from date of purchase for a refund, Must be in brand new, resalable condition. - Damaged Item : Contact us at 562-691-5420 - Manufacturer Warranty : 3 months or 3000 miles(whichever comes first) from the date of purchase - We do not allow any return without RMA# "" ( ) "" ( ) "" ( ) "" ( ) "" ( ) 3.1 44777024eclutchmaster17214236818325-07-2017 19:58:5225-07-2017 19:58:52