Compare: Amazon Craigslist eBay Google Shopping
eCLUTCHMASTER eCLUTCHMASTER STAGE 5 CLUTCH KIT Fit 1996-2012 SUBARU LEGACY 2.5L 3.0L NON-TURBO
Returns Accepted 14808 Reviews from Buyers Seller ratingRatings Safe and secure paymentsSafe and secure payments. 100% Satisfaction Guaranteed

eCLUTCHMASTER STAGE 5 CLUTCH KIT Fit 1996-2012 SUBARU LEGACY 2.5L 3.0L NON-TURBO

138.71
$143.0 (3% off)
About this Item
Available stock:50
Compatibility:See compatible vehicles
Guarantee: Paypal Buyer Protection
Location: Anaheim, California
Returns: Accepted
Condition: New
Share:
About the Seller
ShippingHandling time and Shipping policy

Compatibility
CLUTCH PRESSURE PLATE TYPE : [STAGE 5 PHASE HEAT TREATED SINGLE DIAPHRAGM PUSH TYPE]
CLUTCH SPECIFICS : [225mm, 24 spline]
Country/Region of Manufacture : [United States]
Warranty : [Yes]
Surface Finish : [CAST IRON COPPER CERAMIC MIBA SOLID RIGID]
Placement on Vehicle : [Lower]
Other Part Number : [EXEDY 15010 15-010 15-004 15-021 FF02]
Interchange Part Number : [EXEDY KSB04 15-004 15-021 15801 15954]
Manufacturer Part Number : [EC-55012HP5-EXE-LEG2530]
Brand : [eCLUTCHMASTER]
© 2016 PixalSoft. All Rights Reserved
About This Item
Item Specification
eCLUTCHMASTER STAGE 5 CLUTCH KIT Fit 1996-2012 SUBARU LEGACY 2.5L 3.0L NON-TURBO   eClutchmaster Stage 5 Miba* Racing Clutch Kit Is a brand new stage 5 Xtreme Duty Racing Pressure Plate With Stage 5 6 Puck Copper Ceramic SOLID Miba Racing Disc Setup can hold and 80% more pressure increase over stock. eClutchmaster Stage 5 Miba* 6 Puck Miba* composite Disc is a best material for friction material in the clutch market uses for. Miba is a material use as Aircraft Brakes which stronger than any other material in the clutch disc indurstry. If you want the best the industry has to offer, ask for eClutchmaster 6 Puck Miba* Solid Rigid Copper Ceramic Miba Racing Disc. The eClutchmaster Racing 6 Puck Miba* Disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba Delivering Aggressive Bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, The eClutchmaster Racing 6 Puck Miba Strip Disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result. If you see prices way less than others than competitors that means what you get is what you pay for. Made where country with low labor with low craftsmanship with poor materials.  Street Or Long Life Of Clutch Break-In Required. (500miles-1000miles after installation) Features Of eClutchmaster Stage 5 Miba* Racing Clutch System 1. Heavy Duty Stage 5 Heavy duty racing pressure plate 2. Hi-Leverage Design 3. Precision heat treated single diaphragm 4. Re-Arched Diaphragm for Superior Engagement 5. High clamping force 6. NO unnecessary increase in pedal pressure 7. 6-Wings Ceramic Button Disc without sprung for heavily modified vehcles 8. More Grip Power, longer lasting   Why Miba? . High Temperature Resistance: Up To 930°F (500°C), Short Time Up To 1650°F (900°C) . Very Smooth Engagement . High Wear Resistance . High And Stable Level Of Friction Coefficient . Negligible Mating Material Wear. . Miba Generates 3 To 15% Lower Torque Peaks Compared To The Competition; Reduces Gear Shocks Loads And Same Material As Using Aircraft Brakes. Miba Friction Group Has Been A Development Partner And Supplier Of High-Performance Friction Materials To The Automotive And Machine Industry For Over 30 Years. We Offer Optimized Components For Clutches, And Use High-Quality Materials And Innovative, Technologically Advanced, Processes To Ensure Excellent Wear-Resistance And Friction Coefficients.Clutch Segments Generate The Friction Needed For Torque Transfer From Engine To Transmission, Enabling The Vehicle To Start. They Are Characterized By Particularly High Temperature Resistance And Low Wear.Friction Materials Are An Important Performance Element In Vehicle And Machine Clutches, And Play A Key Role In Overall Efficiency. COMPONENTS: eCLUTCHMASTER HEAVY DUTY STAGE 5 CLUTCH PRESSURE PLATE COVER (2200LBS CLAMPING LOAD) eCLUTCHMASTER STAGE 5 6 PUCK COPPER CERAMIC MIBA SOLID RIGID FRICTION RACING DISC eCLUTCHMASTER THRUST THROWOUT RELEASE BEARING PILOT BEARING ALIGNMENT TOOL APPLICATION: 1996-2012 SUBARU LEGACY 2.5L 3.0L NON-TURBO ITEM SPECIFICATIONS: Brand : eCLUTCHMASTER Manufacture Part Number : EC-55012HP5-EXE-LEG2530 Surface Finish : CAST IRON COPPER CERAMIC MIBA Torque : 312Lb/Ft Horse Power : 338Hp Warranty : Yes Country of Manufacture : United States **FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARIES** eCLUTCHMASTER eCLUTCHMASTER STAGE 5 CLUTCH KIT Fit 1996-2012 SUBARU LEGACY 2.5L 3.0L NON-TURBO eCLUTCHMASTER STAGE 5 CLUTCH KIT Fit 1996-2012 SUBARU LEGACY 2.5L 3.0L NON-TURBO   eClutchmaster Stage 5 Miba* Racing Clutch Kit Is a brand new stage 5 Xtreme Duty Racing Pressure Plate With Stage 5 6 Puck Copper Ceramic SOLID Miba Racing Disc Setup can hold and 80% more pressure increase over stock. eClutchmaster Stage 5 Miba* 6 Puck Miba* composite Disc is a best material for friction material in the clutch market uses for. Miba is a material use as Aircraft Brakes which stronger than any other material in the clutch disc indurstry. If you want the best the industry has to offer, ask for eClutchmaster 6 Puck Miba* Solid Rigid Copper Ceramic Miba Racing Disc. The eClutchmaster Racing 6 Puck Miba* Disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba Delivering Aggressive Bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, The eClutchmaster Racing 6 Puck Miba Strip Disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result. If you see prices way less than others than competitors that means what you get is what you pay for. Made where country with low labor with low craftsmanship with poor materials.  Street Or Long Life Of Clutch Break-In Required. (500miles-1000miles after installation) Features Of eClutchmaster Stage 5 Miba* Racing Clutch System 1. Heavy Duty Stage 5 Heavy duty racing pressure plate 2. Hi-Leverage Design 3. Precision heat treated single diaphragm 4. Re-Arched Diaphragm for Superior Engagement 5. High clamping force 6. NO unnecessary increase in pedal pressure 7. 6-Wings Ceramic Button Disc without sprung for heavily modified vehcles 8. More Grip Power, longer lasting   Why Miba? . High Temperature Resistance: Up To 930°F (500°C), Short Time Up To 1650°F (900°C) . Very Smooth Engagement . High Wear Resistance . High And Stable Level Of Friction Coefficient . Negligible Mating Material Wear. . Miba Generates 3 To 15% Lower Torque Peaks Compared To The Competition; Reduces Gear Shocks Loads And Same Material As Using Aircraft Brakes. Miba Friction Group Has Been A Development Partner And Supplier Of High-Performance Friction Materials To The Automotive And Machine Industry For Over 30 Years. We Offer Optimized Components For Clutches, And Use High-Quality Materials And Innovative, Technologically Advanced, Processes To Ensure Excellent Wear-Resistance And Friction Coefficients.Clutch Segments Generate The Friction Needed For Torque Transfer From Engine To Transmission, Enabling The Vehicle To Start. They Are Characterized By Particularly High Temperature Resistance And Low Wear.Friction Materials Are An Important Performance Element In Vehicle And Machine Clutches, And Play A Key Role In Overall Efficiency. COMPONENTS: eCLUTCHMASTER HEAVY DUTY STAGE 5 CLUTCH PRESSURE PLATE COVER (2200LBS CLAMPING LOAD) eCLUTCHMASTER STAGE 5 6 PUCK COPPER CERAMIC MIBA SOLID RIGID FRICTION RACING DISC eCLUTCHMASTER THRUST THROWOUT RELEASE BEARING PILOT BEARING ALIGNMENT TOOL APPLICATION: 1996-2012 SUBARU LEGACY 2.5L 3.0L NON-TURBO ITEM SPECIFICATIONS: Brand : eCLUTCHMASTER Manufacture Part Number : EC-55012HP5-EXE-LEG2530 Surface Finish : CAST IRON COPPER CERAMIC MIBA Torque : 312Lb/Ft Horse Power : 338Hp Warranty : Yes Country of Manufacture : United States **FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARIES** Free shipping within lower 48 States via USPS Standard, For Expedite Shipping please refer to Payment options. Email us for AK, HI, PR and International Shipping Rate(USPS Priority Air Parcel) PAYPAL CONFIRMED ADDRESS ONLY. WE DO NOT SHIP OTHER THAN A PAYPAL CONFIRMED ADDRESS    FREE SHIPPING WITHIN 48 CONTINENTAL STATES (3-6 BUSINESS DAYS) VIA USPS STANDARD PARCEL. 3 PRIORITY SHIPPING, YOU CAN SELECT USPS PRIORITY AS SHIPPING OPTION, JUST ADD $15.00. FOR INTERNATIONALS SHIPPING $79.00 AND $149.00 FOR CLUTCH AND FLYWHEEL COMBO SET VIA USPS PRIORITY AIR MAIL. For Express For Urgent  please send message thru eBay messaging system for quotation.  - RMA # : Call us at 562-691-5420 (9am - 5pm PST(Mon-Fri)) - Return Shipping : Buyer is responsible for return shipping cost - Exchange : Up to 30days from of purchase.(Brand new condition, no restocking fee) - Return : All returns will be subject to 20% restocking fee.  Return your purchase for up to 30 days from date of purchase for a refund, Must be in brand new, resalable condition. - Damaged Item : Contact us at 562-691-5420 - Manufacturer Warranty : 3 months or 3000 miles(whichever comes first) from the date of purchase - We do not allow any return without RMA# eCLUTCHMASTER, INC 5580 EAST LA PALMA AVENUE ANAHEIM, CA 92807 Phone : (562) 691-5420 Fax: (562) 691-5342 Email : Please contact us through eBay messages by clicking on "Ask a Question". Business Hours : 9AM - 5PM Mon-Fri (Pacific Standard Time). "" ( ) "" ( ) "" ( ) "" ( ) "" ( ) 3.1 44777024eclutchmaster13190413730708-08-2017 23:37:0208-08-2017 23:37:02