ClutchXperts Not Available USER.a9ff0762-29eb-4384-a401-c54095e362fc STAGE 3 RACE CLUTCH KIT+FLYWHEEL fits 2004-2014 ACURA TSX K24 by CLUTCHXPERTS Does Not Apply
Returns Accepted Safe and secure paymentsSafe and secure payments. 100% Satisfaction Guaranteed
STAGE 3 RACE CLUTCH KIT+FLYWHEEL fits 2004-2014 ACURA TSX K24 by CLUTCHXPERTS

STAGE 3 RACE CLUTCH KIT+FLYWHEEL fits 2004-2014 ACURA TSX K24 by CLUTCHXPERTS

$193.03
$199.0 (3% off)
About this Item
Available stock:41
Compatibility:See compatible vehicles
Location: Anaheim, California

Returns: Accepted
Condition: New
Share:
About the Seller
Shipping Handling time and Shipping policy

Compatibility
Disc Diameter : [8.5 in (215 mm)]
Vintage Part : [No]
Performance Part : [Yes]
Type : [Clutch Kit & Flywheel Complete Kit]
Type of Transmissions : [Manual/Stick Shift Only]
Additonal OE/OEM Part Numbers : [68037-2100 08951FW 08-036 08-037 HCK1004 KHC09 HCK1011 08806]
OE/OEM Part Number : [KHC10 09 08806FW HF02 HCK1001 HCK1005 HCK1009, 91471 2-800-ST]
Input Shaft Diameter : [1-1/32 in (26 mm)]
Fitment Type : [Direct Replacement]
Warranty : [YES]
Item Diameter : [8.5 in (215 mm)]
Country/Region of Manufacture : [United States]
Flywheel Material : [4140 Chromium-Molybdenum Forged Steel]
Pressure Plate Type : [Heavy Duty Push-Type Diaphragm]
UPC : [Does Not Apply]
Additonal Other Interchange Part Numbers : [22200-RBC-003 22100-RBC-003, KHC09 HCK1011 08806 191471 HCK1332]
Interchange Part Number : [KHC10 09 08806FW HF02 HCK1001 HCK1005 HCK1009 22300-PRB-003]
Surface Finish : [CAST IRON, 6-PUCK MIBA COPPER CERAMIC, CHROMOLY]
Input Spline Quantity : [24]
Brand : [ClutchXperts]
Plate Diameter : [8.5 in (215 mm)]
Disc Material : [Ceramic]
Flywheel Specification : [Chromoly Lightweight Racing Flywheel]
Transmission Type : [Manual]
Manufacturer Part Number : [CXP-TSX54025HP3 CXP-TSX54025CF]
Clutch Disc Style : [High Torque 6-Puck Sprung Hub]
Manufacturer Warranty : [3 Months]
Item Specifics
eBay

STAGE 3 RACE CLUTCH KIT+FLYWHEEL fits 2004-2014 ACURA TSX K24 by CLUTCHXPERTS

Description

ClutchXperts Stage 3 Racing Clutch Kit is a brand new heavy duty racing pressure plate with 6 puck spurng racing disc setup can hold up to 398HP / Rated 369lb-ft of torque and 80% more pressure increase over stock. It is recommended for use with 'modified' vehicles used for "street and strip". This unit has also proven itself to be very capable for four wheel drive and off-road use, also heavy duty towing and commercial applications

The ClutchXperts Stage 3 racing clutch system uses ClutchXperts Stage 3 Heavy duty pressure plate with 6 puck sprung ceramic disc. This is ultimate extreme-duy street or road / drag racing system. It is built using a special 6-wing ceramic button design disc for long life, outstanding holding capacity and high heat dissipation. All ClutchXperts Racing pressure plates are made from ductile iron (2300 LBS CLAMPING LOAD) which is about 60-70% stronger than conventional cast iron pressure plates other racing clutch manufactures use. It is recommended for use with 'modified' vehicles used for "street and strip". This unit has also proven itself to be very capable for four wheel drive and off-road use, also heavy duty towing and commercial applications.

It offers 70% more holding capacity than a stock 'OEM' clutch while maintaining a stock pedal feel.

About ClutchXperts 6 Puck Sprung Racing Disc-
If you want the best the industry has to offer -- Ask for ClutchXperts 6 Puck Sprung Racing Disc. The ClutchXperts Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced MIBA and Ceramic combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the ClutchXperts Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade.
**The throwout bearing and pilot bearing (if required) included ($80 value) for free!
Street or Long life of clutch BREAK-IN required.

About ClutchXperts Liteweight Racing Flywheel:

MORE ACCELERATION !!

For maximum acceleration there is no substitute for an ClutchXperts Liteweight Racing Flywheel. The decrease in rotating mass allows maximum engine revs to be reached very quickly, resulting in a startling decrease in acceleration time. In some racing organizations, lightweight, Aftermarket Racing flywheels have actually been outlawed because they give such a huge advantage.

RELIABLE AND SAFE!!

Our ClutchXperts Liteweight Racing Flywheel is an ideal performance modification because it has no disadvantages. There are significant benefits of having a ClutchXperts Liteweight Racing Flywheel. Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to the less rotational mass at the crank. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car.

Using a lightweight, ClutchXperts Liteweight Racing Flywheel is a race proven way to improve the performance of any street or race car. Liteweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life.

Because a ClutchXperts Liteweight Racing Flywheel has so much less rotating inertia than the stock 20-30lb stock heavy flywheel., it is easier on your synchros. When you downshift and do not perfectly equalize revs, your synchros must accommodate the difference in flywheel speed and input transmission speed. The lighter the flywheel the less the inertia the synchros must overcome. The longer your synchros last the longer your tranny will last because you are less likely to miss-shift and break things when your synchros are properly functioning.

Engine life is also increased by using a ClutchXperts liteweight flywheel. Since our flywheel is so much lighter there is much less stress on the main bearings.


COMPONENTS:

  • ClutchXperts Stage 3 Heavy Duty 2300LBS Racing Pressure Plate
  • ClutchXperts Stage 3 6-Puck *Miba* Sprung Racing Disc (213mm, 24 spline) 
  • Throwout bearing
  • Alignment tool
  • ClutchXperts 10lbs Forged Chromoly Lightweight Racing Flywheel
  • *Miba* is well known for aircraft brake material for durability and long lasting.

APPLICATION:

  • Fits 2004 - 2008 Acura TSX (2.4L K24)
  • Fits 2009 - 2014 Acura TSX (2.4L K24; Must be used with Hondata Flash Pro)


**FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARY

Image Gallery

STOCK PHOTO

    • RMA # : Message us through eBay for RMA#.
      We do not allow any return without RMA#.
    • Return Shipping : Buyer is responsible for return shipping cost.
    • Exchange : Up to 30days from of purchase (Brand new condition, no restocking fee).
    • Return :
      • All returns will be subject to 20% restocking fee.
      • Return your purchase for up to 30 days from date of purchase for a refund.
      • Must be in brand new, resalable condition.
    • Damaged Item : Message us through eBay.
    • Manufacturer Warranty : 3 months or 3,000 miles(whichever comes first) from the date of purchase.
  • ClutchXperts, Inc.

    We are located in Southern California

    Please contact us through eBay messages by clicking on "Ask a Question".

    Business Hours : 9AM - 5PM Mon-Fri (Pacific Standard Time).

Back
Truegether Logo
About This Item
Item Specification