Guest
Help & Contact
HOW IT WORKS
SELL
SIGN IN
WHY US
Free Shipping
Returns Accepted
Safe and secure payments. 100% Satisfaction Guaranteed
Safe and secure payments. 100% Satisfaction Guaranteed
FULL METAL JACKET MOVIE Poster Signed by 10 cast with COA, AUTHENTIC
$95.0
Buy Now
About this Item
Available stock:
4
Shipping
Product information
This one sheet poster measures: 27x40 Inches and has been hand-signed by the following castmembers:
Mathew Modine, Vincent D’Onofrio, R. Lee Erney, Arliss Howard, Kevyn Major Howard, Bruce Boa, John Terry, Adam Baldwin, Dorian Harewood, and Ed O’Ross
Our autographs are 100% real, authentic and highly unique - We make sure that the stars hand signed our Posters. This item is likely to increase in value and at some point in the future you may decide to sell the item on or maybe get a valuation for insurance purposes.
This COA can not be duplicated or faked and will mean that your item can be easily recognized as an authenticated piece of memorabilia from any worldwide recognized dealer. This poster is Hand-signed, NOT an auto-pen, digital print, or copy of any kind.
For further reassurance every poster is backed by a Lifetime Authenticity and Money-back Guarantee. It is advisable that you keep both your Certificate of Authenticity and signed movie poster in a safe place.
We ship our posters wrapped in thick paper and then placed inside of a thick and secure shipping tube that is then placed inside a long shipping box. NOBODY ships with more protection and care than we do...NOBODY!!
No matter your favorite movie genre or who your most idolized actors and actresses are, we have an enormous selection of authentic autographed celebrity collectibles that caters to everyone. From classic movies to action films to horror movies and everything in between, fans and collectors can celebrate their most loved motion pictures for a lifetime with signed movie posters!
This one sheet poster measures: 27x40 Inches and has been hand-signed by the following castmembers:
Mathew Modine, Vincent D’Onofrio, R. Lee Erney, Arliss Howard, Kevyn Major Howard, Bruce Boa, John Terry, Adam Baldwin, Dorian Harewood, and Ed O’Ross
Our autographs are 100% real, authentic and highly unique - We make sure that the stars hand signed our Posters. This item is likely to increase in value and at some point in the future you may decide to sell the item on or maybe get a valuation for insurance purposes.
This COA can not be duplicated or faked and will mean that your item can be easily recognized as an authenticated piece of memorabilia from any worldwide recognized dealer. This poster is Hand-signed, NOT an auto-pen, digital print, or copy of any kind.
For further reassurance every poster is backed by a Lifetime Authenticity and Money-back Guarantee. It is advisable that you keep both your Certificate of Authenticity and signed movie poster in a safe place.
We ship our posters wrapped in thick paper and then placed inside of a thick and secure shipping tube that is then placed inside a long shipping box. NOBODY ships with more protection and care than we do...NOBODY!!
No matter your favorite movie genre or who your most idolized actors and actresses are, we have an enormous selection of authentic autographed celebrity collectibles that caters to everyone. From classic movies to action films to horror movies and everything in between, fans and collectors can celebrate their most loved motion pictures for a lifetime with signed movie posters!
Customer Reviews
5.0 out of 5 stars based on 30 reviews
This One Is A Vintage Autographed Poster
This is a genuine advertisement poster of the movie Full Metal Jacket. It is a pretty old movie and was an awesome one. The poster has also been given some amazing detailings and it looks like straight from the war. The quality is still the same and it is in a very good condition. There are about 10 autographs in total and each one of them is legit. There is a Certificate of Authenticity included as well.
ByBianca Belairs
A great poster it was
This movie poster is so great. It has clarity and is glossy in appearance. The movie was a blast and so
is the poster. The poster has a total number of 10 autographs on it that are not faked but are authentic
and signed by the original cast members.
ByKelli
It Was A Great Movie Poster With Nice Themed Background
I love action movies and this movie has been on my favorites for a long time, so I got this poster. The paper used here is pretty good and thick, and I got it laminated. The design has been very well done and quite detailed. I have it in my study room.
ByDavid Miller
Works really well, but application can take time
I tend to write long reviews, so here’s a quick list of positives and negatives of the whitening pen. This may also answer some questions you have about using the whitening pen: Positives: -Actually whitened my teeth! -No bad taste -No irritation/pain -Easy to apply -Nice packaging Negatives: -Did not last as long as the box said it would (lasted 1.5 weeks instead of the 30 usages the box promised) -You have completely to dry off your teeth and then paint on the solution on each individual tooth (I personally didn’t mind this. It just took a little while to do) -If you paint over wet teeth, it will ruin the brush -The solution easily clumps up in areas on teeth after it dries (this didn’t bother me much, but thought it was worth mentioning) Okay so here’s my more in depth review: I’ve tried just about every whitening toothpaste on the market, charcoal, baking soda, and more, with no results. I heard about this pen and thought I’d give it a try. I was a bit nervous because I can have sensitive gums, but I felt no irritation whatsoever! The pen lasted exactly a week and a half before I used it all up (so it did not last the 30x stated on the box!). In that time, I can honestly say my teeth look whiter! I was pleasantly surprised. Believe me, the yellow on my teeth was stubborn! I may purchase the pen again to whiten my teeth even more. However, I noticed a few things about the pen that might be considered negatives to some people. First of all, you have to COMPLETELY dry your teeth before “painting” on the whitening solution with the pen. Otherwise, the solution gets all clumpy and dries up on the brush, which will ruin it. Also, be aware that the pen paints this solution on your teeth and sort of leaves a thin film/coating over your teeth overnight. The solution doesn’t have a taste or anything, but you will definitely want to brush your teeth in the morning to get it all off. Also, be aware that the solution will clump up in places on your teeth when it dries. I was not aware that that was how the pen works when I bought it, but looking back, I noticed that most of the negative reviews focused around the white clumpyness of the solution on your teeth. This honestly didn’t bother me much, though it was a little bit of a hassle to dry off my teeth and get an even coating on each tooth. Additionally, you will only be able to whiten your front teeth, as it is to hard to dry off and paint the teeth at the back of the mouth. Overall, I am pleasantly surprised and impressed by this whitening tool. I’ve tried so many different things and this is the first that has worked! If you are okay with the few “negatives” than definitely purchase this product! I would purchase this again! As a note, I tried to take before and after pictures but because of bad lighting, they didn’t turn out. But I did see a huge improvement in my teeth’s whitening!
ByMakenzie Sparks
Burned my gums
My teeth are definitely whiter. It doesn’t taste GOOD, but it’s not terrible or even grimace-worthy. My biggest complaint is the clumping brush and how difficult it is to get the sticky left over product off of it before the next use. Even if you wash it immediately after using, its as difficult as cleaning old product. It just cakes and sticks to the brushes. If that could be solved, I’d immediately give 5 stars instead of 4.
ByJP
Works really well, but application can take time
Absolutely amazing. I’ve only used the teeth whitening overnight stick 3 times and people are already starting to notice a difference in my teeth. I also have very sensitive teeth and tooth pain a lot but this hasn’t seem to affect my pain at all. I highly recommend this teeth whitening product! I’ve always wanted white teeth haha!
ByMakenzie Sparks
Well, it worked.
** I used this Colgate Optic White pen in conjunction with their Optic White toothpaste ** Although I was using their Optic White toothpaste consistently 2 weeks prior to starting this, I can’t say I saw much of a measurable difference in photos until I used this overnight whitener pen. I have used various whiteners throughout the years including tray whiteners at the dentist, and various apply at home gels, some with very high peroxide strengths that were painful to use. I am very torn between rating this a 4 or 5 stars. The whitening difference is only a shade possibly 2 lighter. So keep that in mind that this pen is probably not going to take a heavily tea stained set of teeth to Hollywood blinding white. The results will be modest. The good things: - No horrible taste - Seems to stay on teeth overnight just fine and work its ‘magic’ - Easy to use instruction guide (they made it so easy) Just put it on after brushing at night - Includes handy holder to keep at your bathroom sink as a reminder I’m gonna go ahead and rate this a 5 star because of their honesty. While the results are somewhat mild, Colgate was not deceptive at all with their marketing and truthfully details that their product Increases brightness a few shades at most.
ByChristian Betts
MUST BUY
This definitely works! Night-&-day difference within 4-5 days for me and my teeth have never been whiter (honestly!) CLUMPING BRUSH ISSUE — I found this to be troublesome after the very 1st night of use, but getting a bit of rubbing alcohol onto a paper towel and cleaning the bristles made it like new again each night; ready for the next day.
Byshey wilkey
Easiest whitener I have ever used
I was trying to find a cheaper way to whiten my teeth because they got a bit yellow from meds i am on and being a post cardiac arrest almost 2 ago and I had no dental insurance so I bought this and I am so glad I did!! I i am so happy with this product!! Even a friend of mine who is a dental hygienist said that it was awesome!!
ByDigicabin Family
Here’s how to FIX the clumping brush issue!!
Perfect! I hate whitening strips and needed something that I could apply where I need it to avoid sensitive spots on my canine teeth. I wish I would have taken before photos, but I feel like other reviewers have covered that. I used this three or four nights in a row and saw my teeth go from YELLOW to a nice, bright white. After those initial uses, I touch it up once every 10-14 days and then I'm good to go soon. I'm a coffee drinker, so I like having something quick and easy to use to maintain a healthy looking smile. To the reviewers commenting that once you stop using it your teeth begin to stain again - do you fill your car up with gas once and never have to fill it again? Do you go to the gym to lose 20 lbs and stop going once you reach that goal, expecting to keep the weight off without effort? Do you wash your clothes once and expect they'll stay clean forever? No? Then I'm not sure how teeth whitening is any different. As long as you eat and drink, over time that will show on your teeth. At least this product makes it quick and easy to temporarily reverse the stains.
ByDC
Amazing!! Worked like going to the dentist!!
Alright people, here's the good, the bad, the rule breaker review. You see I gave it 5 stars so keep reading, I'll tell you why. It works but it depends on YOU!! So point #1, just buy 2.. You don't know me but TRUST ME.. You're going to screw up, break the rules (like me) and or you'll see 1 is not enough to do ALL of your teeth if you want. Even if you did it perfect, WHICH YOU WON'T. I wanted 3 shades + and got it 1 shade with 1 pen BUT, top and bottom 4 ONLY. When it says dry your teeth, YEP, DRY YOUR GUMS TOO!! You secrete saliva so just FOLLOW THIS!!! I took toilet paper, dried my top 6 (cainine to canine) starting with my middle tooth on each side, and on the bottom. Click 4 times to smear, 2 more to make sure!! Clicked 4 times bottom, 2 more to make sure!! You'll see after this initial how many clicks you'll need the next night on. Trust me!! Start out this way.. Make SURE, kept your lips spread open and fanned these teeth so fast you'd think you're a human tornado and YES, THAT FAST or use a fan... It's NO JOKE, SPREAD YOUR LIPS AND FAN!! If not, it won't work.. It says APPLY at night so that you don't eat or drink... Here's where I'm just a rebel even though I really did have a cause! Couldn't sleep so I said oh well have to retry tomorrow cuz I'm going to do a couple shots, ok maybe 4 and a beer. I did, and had popcorn.. NOTHING HAPPENED. The coating didn't come off at ALL! Now I didn't rub my teeth after every drink with my tongue, It STAYED ON! Needless to say I was awake for 2ish more hours, woke up, brushed, repeated the next night and LITERALLY HAD A ½ SHADE LIGHTER!! Night 4, had some ice cream, a popsicle and umm night 6 some popcorn! DON'T JUDGE ME, I'M A REBEL!! Rules are for fools!! ?? STAYED ON IF YOU DO IT LIKE I DID!! Seriously people, it does work, really does and I'm just telling you that this is what I did and at my 14 day mark, I'm absolutely HAPPY with this product and got my shades 2ish lighter that I'm happy with. If you're like me, said screw it, nobody is looking at the back or OUTSIDE my smile range of my teeth, still get 2 at the same time or the second on your next payday.. You won't be HOLLYWOOD ready but EVERYONE that knows you, WILL NOTICE but more importantly, it will be so good that you'll feel much more confident.. I have VERY sensitive teeth, cannot use even the sensitivity whitening strips, didn't have one ounce of an issue even when I smeared my gums by accident, lol. Nothing. Hope this helps!
ByMegan Lynn
Great product
Yes this does work and works well. It does come with directions and if you take the time to read them, all of the negative reviews can be explained as a lack of reading the directions. If you dry your teeth very dry (your mouth salivates immediately when you dry your teeth) you will get an even application of the products. Yes you do have residue on your teeth in the morning, but if you are not getting it cleaned off by brushing, you are not brushing long enough. At least 2 minutes of brushing is recommended.
ByS
Good, Bad, I'm a rule Breaker!!
I have used whitening strips, which I found to be cumbersome plus they really irritated my gums. I didn't think this pen would work, but it's wonderful. Very easy to use. No trace of it in my mouth/breath when I go to bed. After a month, there is a very noticeable difference in my smile. It has not irritated my gums at all. Packaging is quite clever. I will continue to use as needed.
ByTima McPherson
Don't panic over instructions
I used this epoxy to cover an 11sq.ft. table filled with approx. 1300 bottle caps. I thoroughly read all instructions, and mixed what I thought was the right amount of product for a seal coat. Turns out I was completely wrong, and once I starting pouring and realized I didn't have enough, I panicked and started eyeballing multiple other batches and mixing rather vigorously and probably not for long enough. I thought for sure I ruined my project. Well, after my horrendous attempt at following the directions meticulously, turns out that my project cured as hard as a rock within the 10 hrs. Next mistake i made: I only bought one of these kits when I needed 2 to completely cover all the bottle caps. I quickly ordered another kit and It was at my door in 2 days (clearly outside of the 10 hour re-coating window). Because at this point I am just throwing caution to wind, I mix both jugs together in their entirety (for like 20 min though) and did one enormous coat. I did not sand or prep the table in any way between the first batch and the second batch 2 days later. Well, my project turned out perfectly smooth, crystal clear, rock hard, with very very few bubbles that no one would ever notice unless they were staring at my table with their face less and 6 inches away from it looking for specifically for flaws. I don't anticipate my guests doing this. I am thrilled with the results, and I don't want all these reviews about "following the directions to a T" scare any beginner epoxiers away. Note: I am NOT recommending you proceed with this product in the same manner I did. Definitely try to follow the directions. I just wanted to provide some insight on my experience that was apparently drastically different than some other reviewers.
Bydeiramenaid1120
Don't panic over instructions
This stuff worked amazing on my very first try. I made a large resin table with embedded license plates and it came out spectacular. READ ALL THE INSTRUCTIONS BEFORE YOU START AS PAINFUL AS THAT MAY BE. THEY REALLY HELPED ME. A couple tips: 1) My project required 4 gallons of product. (3ft by 3ft, 1/2 inch deep - with plates) I accomplished this in (2) pours, each 4 hours apart 2) I mixed 2 gallons for 7 minutes each time and it came out awesome - don't scrape your mixing sticks when you get to the pouring part because you only want thoroughly mixed product to be poured - not remnants of either part alone that you may get if you scrape 3) POUR PART B IN YOUR MIXING BUCKET BEFORE PART A - MIXING WILL BE SO MUCH EASIER
Bydeiramenaid1120
Love this stuff!
Worked great! However, I made the mistake of not reading the instructions online until after purchasing the product, so here are a few helpful things to know. First and most importantly, it absolutely MUST be used in an environment that will be at least 75 degrees for the full 72 hour curing period. I purchased it in early March so I had to crank my heat up uncomfortably high in order to ensure it set properly. Also, after the product is completely cured, it can only withstand temps up to 135 degrees. This makes it less than ideal for countertops, which is exactly what i purchased it for. There is a different formulation available for sale that can be used for that purpose and it will withstand heat up to 500 degrees. In my case, I need to add a final coat anyway, so i'll just purchase the countertop epoxy to add as a final clear coat on top. Finally, even though both bottles contain roughly half a gallon, you absolutely need to measure them out even if you plan on using the entire contents. Some people had trouble with the mixture setting and I suspect this was the culprit. 3oz of pigment was the perfect amount for one gallon.
Bydeiramenaid1120
This stuff worked amazing on my very first try
This product was easy to use and had very little odor. I used it as a final finish on my art projects and also with my resin art. Clear and hard finish.
ByAmber
Not for countertops: Heat resistant to just 135 degrees
I had a really hard time with the bubbles at first and I thought I got a bad batch . I looked at reviews and YouTube videos and couldn’t figure out why I was getting so many bubbles despite following the instructions to the T. So I called the company and they didn’t answer ... luckily they called back the next 3 days because I was so busy I didn’t answer lol. Tips-make sure you keep temperatures between 70-90 f. Make sure before you start mixing that the products are room temperature at least or just not from a cold room, you will have a hard time . you don’t need to mix vigorously, all you need to do is slow controlled mixing without taking your stick or mixing tool out to cause more bubbles . Big Tip- the amount of time in the instructions depends on the amount of epoxy you are mixing . Example , less than 16 ounces at a time is about 5 minutes of mixing slowly by hand , do not mix longer for small amounts because the epoxy will harden really fast , and you know you did it right when you feel the tacky within the hour still (not hard) . Feel the tacky? Good You did it right . Do not mix longer than instructions if you have a big batch made for a large surface area . THE LONGER YOU MIX THE FASTER IT SETS AND HARDENS -which means less time for you to pop bubbles Extra tip- do not mix more than a quarter inch at a time . Do a quarter / wait 4 hours / do another quarter and so on. The bubbles are so easy to get out and if you are mixing a small amount anyways , in the way that I told you then you should have virtually no bubbles . For small amounts like 8 ounces at a time do not change mixing cups . The point of changing cups is to make sure you are scraping the bottom really well to make a good mixture bond . Just soft mixing and make sure you scrape the sides and bottom really well. REALLY IMPORTANT: make sure you do a seal coat or 2/3 first for wood because the Bubbles WILL surface on the edges or surface area if you have any in the wood . They are food safe and I really love the product now that I know how to use it . Was this helpful? I hope so I did a lot of trial and error for this knowledge.
ByAmber
Works well
I’ve used this product several times without fail. Very easy to use just be sure to measure correctly and stir stir stir. If you think you’ve stirred enough, scrap the sides with you stir stick and scrap your stir stick and stir stir stir some more. I used this on my art/craft work table I built. The top of the table was painted 3/4” MDF board. This epoxy resin easily allowed me to mix in some colors. I either used simple acrylic craft paint (little goes a long way) or some micro pigment powders, depending on how opaque I wanted the color and even added some glitter in some of the mixtures. I used an old hair dryer to move the colored epoxy around and a torch to get the bubbles out. For one project I did, I felt the epoxy was too thick and I was able to mix in a very small amount of 98% rubbing alcohol to help thin it and didn’t have any problems with curing. Once cured you get an awesome smooth like glass finish. Remember, stir stir stir and stir some more. I LOVE the results I have achieved with this product!
Byeric9000
Pro tips here , READ IT
Provided a beautiful finish on our bar. Take note to ALWAYS brush on a THIN for the first coat to seal the wood. The instructions arent too clear on this until you get to the FAQ. I had to sand down an area that bubbled up due to pouring too thick of a first coat.
Byeric9000
Easy to use!
Level your project on a waist-high surface with blocks under, project should not have and holes or gaps. Mix epoxy at a 1/1 ratio, be extra carefull about this. Stir well for 5-10 min, but dont whip, should turn completely clear like water, bubbles are okay. Pour evenly back and forth. Spread entire top quickly with a notched plastic 4" putty spreader, I made my own triangle notches with scissors. Use the container to catch edge drips. Use a nylon brush for the sides. Light a butane torch and move quickly popping the bubbles, not too close. Repeat this every 10 mins for 1 hour. Scrape epoxy from under edges and apply to any areas that may lose some from leveling. Let dry 12-16 hours. It will be crystal clear like water and hard like nail polish. Looks professional. Remember, MIX as PERFECT as you can 1/1, and stir very very well. My only complaint is that its over priced and not a lot of room for error.
ByKOHIO
Beautiful finish, beware heavy coating of first layer!
I bought this epoxy to finish a bar top I plan to use on a covered, outside bar once Spring arrives. This was my first experience with an epoxy such as this and some of the previous reviews had me a little nervous, but I didn't run into any issues and I'm happy with the results. I poured the resin in a basement that was ~60 degrees and had no problems with applying it or with it curing. If you are working in a cool environment I'd recommend warming up the bottles of epoxy a little before mixing as it makes the mixing process much easier. Overall I am very happy with this product and will definitely be using it again in the future.
ByScrappygirl
Don't panic over instructions
The media could not be loaded. Just finished my first project working with this, i mixed glitter in it and poured over the table top. Such an amazing and unique piece, the glitter is floating in different levels in the epoxy and the surface is super smooth and shiny. My advice, mix well, do it on a HOT day indoors, work fast use a heat gun for the bubbles/cloudyness
Bydeiramenaid1120
Perfect glitter table top
So I don't write feedbacks' very often. I had to with this product. It works well. Make sure the A-Epoxy is 85 degrees or just do both equaly. Put these on the dash of your vehicle and let it get warm on High Heat for an alternate source. Pour B- Hardner First then A-Epoxy because the Hardner works as a lubricant to stop the epoxy from sticking to the container and it mixes so much easier. Pour the mixed 50/50 epoxy for 10 min let it set for 30 minuets, Spread then use a heat gun or torch to get the bubble out. 2 1/2 Hours later it will stiffen up and you will have to stop working on it. Done
Byhine0108
Walnut Bar Top
For those of you who would like to measure by weight instead of by volume it is important to know that Parts A and B do NOT have the same density. Therefore, here are the ratios you will need if you are using weight: For every 1 oz volume of Part A is equal to 33 grams of weight. For every 1 oz volume of Part B the weight is 27 grams of weight. The benefit of using weight instead of volume is that you may use only one container, rather than 3, which makes the process of mixing go faster.
ByMichael Walker
Great stuff easy for a novice who follows directions
Don’t know about all the bad reviews but I never had problems with this brand. If you follow instructions. Mix equal parts from A and B, mix slowly until it’s clear you you should not have any problems, it won’t dry tacky, sadly it don’t come in squeeze bottles, that’s not a real problem to leave a bad review over. Dollar tree has bottles you can pour it into and problems solved. This product is more for bigger projects. Squeeze bottles are more for smaller craft projects. Please don’t let the bad reviews scare you away. You can’t beat this price. I’ve tried so many other epoxy brands and this one hands up the best one I’ve used. Use for Tumblers, molds, keychain, canvas and more
Byshane barbur
Measuring by Weight instead of Volume
I honestly really love this product. If you know how to mix, use & finish it’s absolutely fantastic for the price. I have seen too many morons leave bad reviews for this bc they don’t understand the concept of properly mixing, removing bubbles and/or sanding & polishing. If you see a bad review it’s bc they didn’t do their homework on how to make it work for them. I ended up with perfectly clear shot glasses with gold foil, live edge fills, cutting boards & more. Moron Tips: - mix slowly to minimize bubbles - mix for at least 3-4 min - pour quickly after mixing to maximize clarity - use a heat gun to remove bubbles - leave it ALONE for 12-24 hours (temperature is important too) - step down sanding is possible/needed (Dry 120, 180) (Wet 240/320, 400, 600) - I used auto polish, worked like a charm.
Byshane barbur
It’s worth it
This is the first time I have ever used epoxy before. I decided to go with this product, despite some of the bad reviews, and I’m glad I did. I don’t know how some of these people are getting undesirable results. I watched one YouTube video and went to town and it came out flawlessly. Have all your materials and area set up before you start. If it’s gunky or isn’t drying over night, you didn’t mix the amounts correctly, or you didn’t mix it well enough (mix for 3 minutes, scraping sides and bottoms). If your getting bubbles it’s because you didn’t torch them out. real wood emits gas which makes bubbles in epoxy, and type of torch run lightly over the surface pops the bubbles. Generally only need to do this about 3 times or so, over about 30 minutes, but it’s a good idea to keep an eye on it anyway. Just watch a quick YouTube video and get to work. It’s not rocket science. Update: I completed my second project using this epoxy and once again, it came out flawlessly! I’ve added a picture.
ByRiver
If it’s your first time using, do your homework.
Very easy to use. Follow the instructions including the base layer. Using a propane torch to remove bubbles is a great trick that they recommend. Just apply a very quick sweeping pass, almost no heat. Very clear. Levels almost perfectly. Fill any cracks and get the surface as flat as possible prior to application. Not only smooth but flat. I used clear colored 5min epoxy to fill the cracks. I you don't do it in a warm area the leveling may not be as good. I recommend over 60degF. This stuff goes a long way and is actually pretty cheap on a square foot basis. I used about 16oz (both coats) on a 3sq.ft. end table. That was more than enough. Use the foam disposable brushes for the initial spreading. It takes about 4-6 hours to become dust free but it is still pretty soft. They recommend 72 hours prior to using. Added comment: The 72 hours may not be enough. I left a water glass on the table 3 days+ after finishing and it left a faint ring. The finish was still soft. Not bad enough to refinish the table but the finish was not completely cured and hard after 72hrs.
ByRiver
Great product, easy to use!
This is a pretty easy epoxy to work with but I am no expert. I have purchased several gallons for my project which is my first project and a deep pour. What I learned: 1. Do a little home work (I didn’t) 2. Caulking is important(I didn’t) 3. Mix small batches and pour lot’s of thin layers( I didn’t) 4. Don’t buy cheap sand paper. I started with cheap sanding pads for my orbital. Late in the project I switched to Diablo pads. Some things are just worth paying for. 5. Patients (not my strong suit-actually I wouldn’t say I learned patients, but I would recommend you have some if you’re going to try this) 6. Experience is what you get when you don’t get what you want. ( I got a ton of experience. I’m glad I did this project, but I made some big mistakes that cost a lot of money, time, and the finished product won’t be great) I will use this product again.
ByMatthew S.
